VUE AWD L4-2.2L VIN D (2005)
8. Remove the fluid level indicator (35) and inspect the fluid level. The fluid level should be between the upper mark (1) and the lower mark (2).
9. If the fluid level is below the lower mark (2), inspect for fluid leaks at the transmission, the hose and line joints, and at the cooler lines. If the fluid
level is above the upper mark (1), determine the cause of the overfill condition and correct as needed.
10. Important:
^
Always use the specified ATF. If specified ATF is not used, shift quality is affected.
^
Only add enough ATF to bring the fluid level to the upper mark on the fluid level indicator (35).
When adding less than 946 ml (1 qt) of ATF, insert a funnel into the fluid level indicator tube (37), and add the correct amount of ATF to bring
the level to the upper mark.
11. When adding more than 946 ml (1 qt) of ATF, open the transmission fluid fill plug (79) located on top of the transmission case section (31).
12. Insert the fluid level indicator back into the fluid level indicator tube (37).
