VUE AWD L4-2.2L VIN D (2005)
62. Connect the ground strap to the camshaft cover assembly.
^
Tighten the camshaft cover ground strap bolts to 10 Nm (89 inch lbs.).
63. Connect the degas hose and attach to the fuel rail.
64. Connect the coolant pipe bracket bolts to the cylinder head.
^
Tighten the coolant pipe bracket bolt to 10 Nm (89 inch lbs.).
65. Install the spark plugs (if removed).
^
Tighten the spark plugs to 20 Nm (15 ft. lbs.).
66. Install the ignition module assembly to the cam cover and hand-tighten the retaining bolts.
^
Tighten the ignition module-to-camshaft cover bolts to 8 Nm (71 inch lbs.).
67. Install the air cleaner assembly and bolt.
^
Tighten the air cleaner-to-support bracket bolt to 10 Nm (89 inch lbs.).
68. Install the outlet resonator/duct assembly into position.
69. Connect the PCV fresh air vent hose assembly.
70. Tighten the clamp at the throttle body assembly.