VUE AWD L4-2.2L VIN D (2005)
Accelerator Pedal Position Sensor: Service and Repair
ACCELERATOR PEDAL POSITION ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the connector position assurance (CPS) from the accelerator pedal position (APP) sensor connector.
2. Disconnect the APP sensor harness connector.
3. Remove the APP assembly attachment bolts to the brake pedal assembly.
IMPORTANT:
-
Due to clearance issues, the upper attachment bolt cannot be removed from the accelerator pedal assembly. Loose then bolt completely and leave
the bolt in the component until the assembly is removed from the vehicle.
-
A speed wrench may be used to aid in the removal and installation.
4. Remove the APP assembly from the vehicle.
INSTALLATION PROCEDURE