VUE AWD L4-2.2L VIN D (2005)
Canister Purge Solenoid: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Turn ignition OFF.
CAUTION: Do not allow smoking or the use of open flames in the area where work on the fuel or EVAP system is taking place. Anytime
work is being done on the fuel system, disconnect the negative battery cable, except for those tests where battery voltage is required.
2. Disconnect both purge link quick connects from the evaporative emission (EVAP) purge solenoid.
3. Disconnect the EVAP purge solenoid harness connector.
4. Slide the EVAP purge solenoid from the retaining bracket.
INSTALLATION PROCEDURE
1. Slide the EVAP purge solenoid into the retaining bracket.
2. Connect the purge line quick connects to the EVAP purge solenoid. Push in the connector until a slick is heard, then pull back to confirm positive
engagement.
3. Connect the EVAP purge solenoid harness connector.
