VUE AWD L4-2.2L VIN D (2005)
Canister Vent Valve: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER VENT SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Raise the vehicle on a hoist.
CAUTION: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a
hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.
IMPORTANT: The evaporative emission (EVAP) vent solenoid is located on the top of the EVAP canister.
2. Remove the 3 EVAP canister-to-underbody fasteners and slightly lower the EVAP canister enough to remove the EVAP vent solenoid.
IMPORTANT: Take care when removing the EVAP vent solenoid from the EVAP canister. Fuel vapor lines are fragile.
3. Disconnect the EVAP vent solenoid electrical connector.
4. Turn the EVAP vent solenoid counter clockwise and remove from the EVAP canister.
INSTALLATION PROCEDURE
