VUE AWD L4-2.2L VIN D (2005)
Control Module: Service and Repair
article: docid= 1548962
Transmission Control Module (TCM) Replacement
Removal Procedure
1. Important: Wires to the TCM connector have 350-400 mm of extra length to aid in the diagnosis and repair of the TCM. Re-tape wires after
repairs.
Remove the screws from the instrument panel (I/P) lower closeout panel.
2. Remove the I/P lower left closeout panel.
3. Release the transmission control module (TCM) (2) from the TCM bracket (5).
4. Un-wrap the tape from the extra length of wires in wiring harness.
5. Pull the TCM down to access the electrical connector.
6. Release the TCM electrical connector (1) from the TCM.
7. If TCM bracket replacement is necessary, remove the TCM bracket nuts (3).
8. Remove the TCM bracket (5) from the vehicle.
Installation Procedure
