VUE AWD L4-2.2L VIN D (2005)
1. Position the generator and install the top bolts finger tight.
2. Install the bottom bolts and tighten all the generator bolts.
Tighten the generator-to-engine block bolts to 22 N.m (16 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the electrical connections.
Tighten the B+ cable-to-generator nut to 20 N.m (15 lb ft).
4. Install the accessory drive belt.
IMPORTANT: Use the required accessory drive belt removal tool number J 44811.
5. Install the throttle body air duct.
6. Connect the negative battery cable.
Tighten the battery terminal bolt to 17 N.m (13 lb ft).
7. Reprogram the radio stations.