VUE AWD L4-2.2L VIN D (2005)
6. Remove the upper rear window molding.
7. Remove both the left and right rear corner garnish moldings.
8. Remove the rear headliner push-in retainers.
9. Remove the rear coat hooks.
10. Gently pull down the right rear corner to access the roof rail module - right connector.
11. Remove the connector position assurance (CPA) from the roof rail module - right connector.
12. Disconnect the roof rail module - right connector from the vehicle harness connector.
13. Remove the lower center pillar trim.
14. Remove the CPA from the seat belt pretensioner - RF connector.
15. Disconnect the seat belt pretensioner - RF connector.