VUE AWD L4-2.2L VIN D (2005)
4. Important: When disconnecting the stabilizer link, hold the link with a wrench to prevent turning.
Remove the stabilizer link to control arm nut.
5. Remove the stabilizer link from the vehicle.
Installation Procedure
1. Position the stabilizer link through the control arm.
2. Notice: Refer to Fastener Notice in Service Precautions.
Important: When connecting the stabilizer link, hold the link with a wrench to prevent turning.
Install the stabilizer link to control arm nut.
^
Tighten the nut to 15 Nm (11 ft. lbs.).
