VUE AWD L4-2.2L VIN D (2005)
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the Strut assembly to the vehicle.
^
Tighten the strut to body nuts to 25 Nm (18 ft. lbs.).
^
Tighten the strut to body bolt to 25 Nm (18 ft. lbs.).
2. Attach the strut to the steering knuckle using new bolts and nuts.
^
Tighten the bolts and nuts to 180 Nm (133 ft. lbs.).
3. Inspect the stabilizer link seals for damage and replace the link as necessary.
4. Important: Do not allow the stabilizer link ball stud to rotate while installing the link nut.