VUE AWD L4-2.2L VIN D (2005)
Shift Interlock Cable: Adjustments
Park Lock Cable Adjustment
1. Release the adjuster piece by gently prying up on the adjuster locks and unlocking the tab, indicated by arrows.
2. Install the park lock cable end terminal on the control assembly aligning the cable fitting to the pin and pushing forward. When installing be sure
not to install the cable end fitting on an angle or push down on the cable portion as this may cause cable to mis-adjusted.
3. Remove the lock cylinder bezel from the steering column shroud by carefully prying with a thin bladed screwdriver.
