VUE AWD L4-2.2L VIN D (2005)
Shift Cable: Service and Repair
5AT
Automatic Transmission Range Selector Cable Lever Replacement
Automatic Transmission Range Selector Cable Lever Replacement
^
Tools Required
-
J 36346 Fascia Retainer Remover
Removal Procedure
1. Notice: The control cable must be disconnected from the transaxle range switch lever prior to disconnecting it from the control cable bracket.
Otherwise damage to the manual shift shaft may result, requiring transaxle disassembly.
Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the left splash shield.
4. Remove the range selective lever bolt and cover.
5. Using the J 36346, disconnect the control cable from the transaxle range switch lever.
6. Remove the transaxle range switch lever nut (4), lock nut (3), washer (2), and lever (1).
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
