VUE AWD L4-2.2L VIN D (2005)
1. Install the transmission mount in the side rail.
^
Tighten the transmission mount to side rail bolts to 37 Nm (27 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
Important: Hand start all bolts before tightening.
2. Use the floor jack to raise the powertrain into position.
3. Align both side mounts with the surfaces flush with the mount brackets.
4. Align all the bolt holes in both side mounts and hand tighten both upper mount bolts, three per side.