VUE AWD L4-2.2L VIN D (2005)
1. Install the rear door regulator through the lower access hole in the door structure.
2. Position the window regulator on the keyhole slot bolts (2, 3, 5) in the door structure.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the net-hole regulator bolts.
Tighten all of the bolts in the sequence shown to 10 N.m (89 lb in).
4. Install the rear door window. Refer to Window Replacement - Rear Door (See: Window Glass/Rear Door Window Glass/Service and Repair) .