VUE AWD L4-2.2L VIN D (2005)
Wiper Blade: Service and Repair
Blade Element Replacement - Rear
BLADE ELEMENT REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Lift the wiper arm up to the service position.
2. Remove the wiper blade element by squeezing the metal tabs and pulling on the end of the insert at the heel claw.
INSTALLATION PROCEDURE
1. Slide the wiper blade element into the wiper blade, starting with the heel claw, so that the claw engages in the groove of the wiper blade element.
IMPORTANT: Do not remove the retainer clips from the new wiper blade element until installed.
2. Guide the wiper blade element through the wiper blade claw sets.