VUE AWD V6-3.5L VIN 4 (2004)
Rear Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Rear Bumper
Fascia Replacement - Rear Bumper
Removal Procedure
1. Remove the rear wheelhouse liners. Refer to Wheelhouse Liner Panel Replacement - Rear (See: Fender/Rear Fender/Rear Fender Liner/Service
and Repair) in Body Rear End.
2. Remove the rear fascia to body push-in retainers.
3. Remove the rear fascia from quarter panel by reaching through the wheelhouse opening and pushing the tabs to unlock the rear fascia.
4. Slide fascia rearward out of the quarter panel brackets to remove from vehicle.
Installation Procedure