VUE AWD V6-3.5L VIN 4 (2004)
Drink Holders: Procedures
CUP HOLDER REPLACEMENT - FRONT FLOOR CONSOLE - REAR
REMOVAL PROCEDURE
1. Remove the front floor console.
2. Pull all the way out on the cup holder.
3. Remove the screws from the cup holder track.
4. Remove the cup holder and the track from the console.
5. Pull to separate the cup holder from the track.
INSTALLATION PROCEDURE
1. Install the cup holder to the track.
2. Position the track in the console assembly.
3. Install the console track screws.
NOTE: Refer to Fastener Note in Service Precautions.
