VUE AWD V6-3.5L VIN 4 (2004)
4. Install the side trim panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the rear seat shoulder belt to the rear lock pillar.
Tighten the belt fastener to 50 N.m (37 lb ft).
6. Snap the shoulder belt cover over the fastener.
7. Raise the rear seat back.
8. Test the rear seat shoulder belt to ensure proper operation.
9. Install the door seal over the edge of the garnish molding.
Garnish Molding Replacement - Rear Corner
Garnish Molding Replacement - Rear Corner
Removal Procedure
