VUE AWD V6-3.5L VIN 4 (2004)
Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERY REPLACEMENT
NOTE:
-
Use of the wrong battery size may damage the transmitter.
-
When removing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the
transmitter.
IMPORTANT: If the transmitter won't work, perform the RKE System Check before replacing the battery. Also, before replacing the battery in the
transmitter, make sure that the battery is touching both the negative and positive contacts inside of the transmitter.
For battery replacement, use a Panasonic type CR2032 3-volt battery, or equivalent.
1. Use a small coin, or flat-head screwdriver, to separate the bottom of the transmitter from the top.
2. Remove the circuit board from the transmitter housing and key pad by pressing on the LOCK button.
NOTE: Do not use sharp objects to help slide the battery out of the clip. This may result in damage to the circuit board.