VUE AWD V6-3.5L VIN 4 (2004)
8. For vehicles with heated seats connect the heat module electrical connector.
9. If the seat is equipped with a lumbar support, perform the following procedure:
1. Pull the lumbar cable sleeve forward.
2. Using a sharp-bladed tool, make a small slit where the lumbar actuator meets the cover.
3. Install the lumbar knob by pushing firmly.
4. Adjust the lumbar knob to ensure that the lumbar is operating correctly.
10. Install the front seat into the vehicle.
Seat Cushion Cover and Pad Replacement - Rear
SEAT CUSHION COVER AND PAD REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear seat assembly.
2. Remove the anchor bolts from the rear seat buckle.