VUE AWD V6-3.5L VIN 4 (2004)
Backing Plate: Service and Repair
Drum Brake Backing Plate Replacement
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
Notice: Do not pry against the splash shield or backing plate in attempt to free the drum. This will bend the splash shield or backing plate. A bent
backing plate may cause brake chatter and/or pulsation.
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the brake drum.
4. Remove the brake shoes.
5. Remove the park brake cable from the park brake actuator lever.
6. Depress the retaining fingers on the park brake cable (1) and remove the park brake cable from the backing plate.
7. Remove the wheel cylinder.
8. Remove the wheel bearing/hub assembly.
9. Remove the backing plate.