VUE AWD V6-3.5L VIN 4 (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Modulator Assembly Replacement
Brake Modulator Assembly Replacement
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Remove the transmission control module (TCM), if equipped, from the mounting bracket and position aside.
3. Clean the brake modulator assembly pipe fitting areas of any accumulated dirt and foreign material.
4. Disconnect the electrical connector from the electronic brake control module (EBCM).
5. Place a shop towel under the brake modulator assembly to catch any brake fluid loss.