VUE AWD V6-3.5L VIN 4 (2004)
Fan Shroud: Service and Repair
Cooling Fan and Shroud Replacement
Removal Procedure
1. Remove the front fascia.
2. Drain the coolant.
3. Disconnect the electrical connectors from the fan motors.
4. Unclip the wire harness from the fan assembly.
5. Unclip the transmission cooler lines from the fan assembly.
6. Remove the Condenser Radiator Fan Module (CRFM) closeout panel retainers from the condenser.
7. Remove the CRFM closeout panel from the condenser.
8. Remove the radiator inlet hose clamp from the radiator.
9. Remove the radiator inlet hose from the radiator.