VUE AWD V6-3.5L VIN 4 (2004)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement (Right)
Valve Rocker Arm Cover Replacement- Right
Removal Procedure
1. Disconnect the vacuum brake booster hose.
2. Disconnect the MAP sensor connector.
3. Disconnect the IAT sensor connector.
4. Disconnect the ECT sensor connector.
5. Disconnect the EVAP purge hose from the purge valve.
6. Remove the intake manifold.
7. Disconnect the fuel injector connectors.
8. Remove the wiring harness bracket bolt from the valve rocker arm cover.
9. Remove the ignition coils.
10. Remove the bolts (543), grommets (544), valve cover (542) and gasket (541).
11. Remove the seals (540). if required.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.