VUE AWD V6-3.5L VIN 4 (2004)
10. Remove the evaporator core from the blower case assembly. Spraying the perimeter of the evaporator core seal with a soap and water mixture will
ease removal.
INSTALLATION PROCEDURE
1. Add the proper of PAG oil to the evaporator core. Refer to Refrigerant System Capacities.
2. Inspect the seal around the evaporator core. Make sure the seal is in correct position and retained properly.
3. Spray the seal with a soap and water mixture to ease the installation of evaporator core.
4. Install the evaporator core to the blower case assembly.