VUE AWD V6-3.5L VIN 4 (2004)
Engine Control Module: Service and Repair
POWERTRAIN CONTROL MODULE (PCM) REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the battery negative cable.
2. Disconnect the wiring harness.
3. Depress the retaining tab and remove the powertrain control module (PCM).
4. Remove the PCM from the housing.
INSTALLATION PROCEDURE
1. Install the PCM into the housing bracket.
2. Connect the wiring harness.
3. Connect the battery negative cable.
4. Program the PCM. Refer to Service Programming System (SPS) in Programming. See: Testing and Inspection/Programming and Relearning