VUE AWD V6-3.5L VIN 4 (2004)
Knock Sensor: Service and Repair
KNOCK SENSOR (KS) REPLACEMENT
REMOVAL PROCEDURE
1. Remove the lower left intake manifold.
2. Disconnect the wiring harness connector from the knock sensor (KS).
3. Remove the KS from the engine block.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: DO NOT apply thread sealant to the sensor threads. The sensor threads are coated at the factory and applying additional sealant
affects the sensors ability to detect detonation.