VUE AWD V6-3.5L VIN 4 (2004)
Emergency Contact Module: Customer Interest
OnStar(R) - No Power/Inoperative/No LED
TECHNICAL
Bulletin No.: 05-08-46-001D
Date: May 02, 2008
Subject:
OnStar(R) Generation 5 or 6 (Digital) System Inoperative/Has No Power, LED Light Not On (Remove/Reinstall OnStar(R) Fuse and Replace VCIM or
Follow SI Diagnostics)
Models
Supercede:
This bulletin is being revised to update the information on VCIM ordering instructions in step 3 of the Correction statement.
Please discard Corporate Bulletin Number 05-08-46-001C (Section 08 - Body & Accessories).
Condition
Some customers may comment any or all of the following conditions:
^
The OnStar(R) system may be inoperative.
^
The OnStar(R) system may have no power.
^
The OnStar(R) LED light may not be on.
The technician may also not be able to communicate with the OnStar(R) Vehicle Communication Interface Module (VCIM) with a Tech 2(R).
Correction
Notice:
On 2006 Chevrolet Impala and Monte Carlo models, make sure the ignition is OFF and the vehicle has "RAP"ed out prior to removing the
OnStar(R) fuse. Disconnecting power to the OnStar(R) module while the ignition is ON may discharge and permanently damage the OnStar(R)
back-up battery.
