VUE AWD V6-3.5L VIN 4 (2004)
7. Separate the EBCM from the BPMV by carefully pulling apart.
Installation Procedure
1. Clean the sealing surface of the BPMV, with denatured alcohol and a clean shop cloth.
2. Install the EBCM to the BPMV.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the EBCM-to-BPMV attaching screws. Tighten the bolts in a cross pattern.
^
Tighten the bolts to 3 Nm (27 inch lbs.).
4. Connect the pump motor electrical connector.
5. Connect the electrical connector to the EBCM.
6. Reposition the TCM, if equipped, to the mounting bracket.
