saturn Workshop Repair Guides

Saturn Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Relay Box: Service and Repair
Instrument Panel Electrical Center or Junction Block Replacement

INSTRUMENT PANEL ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT

REMOVAL PROCEDURE

1. Turn the ignition OFF.

IMPORTANT:  Record all preset radio stations.

2. Remove the screws from the battery cooling box. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Disconnect the positive battery cable.
5. Remove the console.

6. Remove the nut holding the following fuse block connectors to the back of the I/P fuse block (4):

-

The body 68-way connector (1)

-

The I/P 68-way connector (2)

-

The I/P 24-way connector (3)

Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Service and Repair > Instrument Panel Electrical Center or Junction Block Replacement

< PREV PAGE NEXT PAGE >