VUE AWD V6-3.5L VIN 4 (2004)
1. Position the shoulder belt pretensioner retractor into the center pillar positioning unit with the locking tab in the body structure notch.
IMPORTANT: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.
2. Install the retractor fastener.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fastener to 45 N.m (33 lb ft).
3. Connect the electrical connector to the pretensioner retractor.
4. Snap the shoulder belt webbing retainer into the center pillar.
5. Install the lower garnish molding into the center pillar.
6. Install the seat belt anchor to the seat assembly.
7. Install the side trim cover to the front seat.