VUE AWD V6-3.5L VIN 4 (2004)
1. Raise and support the vehicle.
2. Remove the front tire and wheel assembly.
3. Remove the lower control arm.
4. Remove the rear bushing nut.
5. Remove the rear bushing.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the rear bushing to the lower control arm.
^
Tighten the nut to 115 Nm (85 ft. lbs.).
2. Install the lower control arm.
3. Install the front tire and wheel assembly.
4. Lower the vehicle.