VUE AWD V6-3.5L VIN 4 (2004)
Torque Converter Clutch Solenoid: Service and Repair
Torque Converter Clutch (TCC) Solenoid Replacement
Removal Procedure
1. Remove the battery tray.
2. Disconnect the wiring harness from the torque converter clutch (TCC) solenoid.
3. Remove the TCC solenoid bolts,
4. Remove the TCC solenoid assembly.
Installation Procedure
1. Install the TCC solenoid assembly to the transmission case assembly.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the TCC solenoid bolts.
-
Tighten the TCC solenoid bolts 12 Nm (106 inch lbs.).
3. Connect the wiring harness to the TCC solenoid.
4. Install the battery tray.