VUE AWD V6-3.5L VIN 4 (2004)
6. Remove the transmission mount bracket to transmission bolts.
7. Remove the transmission mount bracket from the vehicle.
Installation Procedure
1. Position the transmission mount bracket to the transmission.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the transmission mount bracket to transmission bolts.
-
Tighten the bolts to 110 Nm (81 ft. lbs.)
3. Install the H02S sensor.
4. Lower the steering gear to the frame.
5. Install the steering gear to frame bolts.