saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Transmission Speed Sensor, CVT > < A/T - VT25-E Oil Cooler Flushing Procedure|Page 5242
Page 3
background image

Important:

Debris may be trapped within the bypass valve of the cooler lines. Therefore, replace the cooler lines any time a transaxle is replaced or
repaired for a condition that may generate debris from internal damage.

23.

Install the new oil cooler lines, P/N 22724408, to the oil cooler and transaxle.

24.

Add transaxle fluid and inspect the level according to the Transaxle Fluid Level Checking Procedure in the VT25-E section the Service Manual or
SI.

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Transmission Speed Sensor, CVT > < A/T - VT25-E Oil Cooler Flushing Procedure|Page 5242