saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Liftgate Window Glass > < Door Window Channel|Page 12392
Page 2
background image

2. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door  (See: Body and Frame/Doors, Hood and Trunk/Doors/Front

Door/Front Door Panel/Service and Repair) .

Front Side Door Window Belt Outer Sealing Strip Replacement

Sealing Strip Replacement - Front Door Window Belt Outer

Removal Procedure

1. Remove the belt seal retaining screw at the rear edge of the door.
2. Remove the outside rearview mirror. Refer to Mirror Replacement  See: Body and Frame/Mirrors/Service and Repair
3. Remove the outer belt seal by lifting up on the seal starting at the rear and working forward.

Installation Procedure

1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
3. Install the outside rearview mirror. Refer to Mirror Replacement  See: Body and Frame/Mirrors/Service and Repair

Notice:  Refer to Fastener Notice   in Cautions and Notices.

4. Install the outer belt seal retaining screw.

Tighten the screw to 2 N.m (18 lb in).

Liftgate Window Glass > < Door Window Channel|Page 12392