VUE AWD V6-3.5L VIN 4 (2004)
1. Install the front door regulator through the lower access hole in the door structure.
2. Position the window regulator on the keyhole slot bolts (2, 3, 5) in the door structure.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the net-hole regulator bolts.
Tighten all of the bolts in the sequence shown to 10 N.m (89 lb in).
4. Connect the electrical connector to the front door regulator.
5. Install the front door window. Refer to Window Replacement - Front Door (See: Window Glass/Front Door Window Glass/Service and Repair) .