VUE FWD L4-2.4L (2008)
8. Position the passenger side air inlet grille panel (2) to the plenum area.
9. Secure the windshield washer hose to the plenum and to the washer nozzle (1).
10. Position the panel around the hood hinge and ensure the tabs on the backside of the panel are located under the bottom edge of the windshield.
11. Align the holes in the air inlet grille panel to the holes in the upper plenum.
12. Install the 8 retainers.
13. Push the center of the retainers inward to secure.
14. Install the air inlet grille panel sealing strip assembly.
15. Secure the 9 retaining clips inside the sealing strip to the air inlet grille panel.