VUE FWD L4-2.4L (2008)
1. Connect the electrical connector to the sunroof control module.
2. Insert the control module tabs into the sunroof module slots.
3. Slide the sunroof express module away from the sunroof motor until it is fully engaged.
4. Verify the proper operation of the sunroof before securing the headliner.
5. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair) .
6. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning) for programming and setup information.