saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Valve Cover|Service and Repair|Page 3590 > < Fuel Pressure Gage Installation and Removal|Page 3586
Page 1
background image

Valve Cover: Service and Repair

Camshaft Cover Replacement (LE5 2.4L)

Removal Procedure

1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement  (See: Intake Manifold/Service and Repair) .
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement  (See: Tune-up and Engine Performance Checks/Air Cleaner

Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .

3. Disconnect the intake (3) and exhaust (2) camshaft position actuator solenoid valve electrical connectors.

4. Remove the ignition coils. Refer to Ignition Coil Replacement  (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair) .
5. Remove the engine harness clips (1, 2) from the cover.

Valve Cover|Service and Repair|Page 3590 > < Fuel Pressure Gage Installation and Removal|Page 3586