VUE FWD L4-2.4L (2008)
1. Install the catalytic converter (2) along with a NEW gasket to the exhaust manifold.
2. Position and join the exhaust pipe to the catalytic converter studs.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the catalytic converter to muffler nuts.
Tighten the catalytic converter to muffler nuts to 17 N.m (13 lb ft).
4. Install the catalytic converter to exhaust manifold nuts (1).
Tighten the nuts to 50 N.m (37 lb ft).
5. Install the heated oxygen sensor. Refer to Heated Oxygen Sensor 2 Replacement (See: Powertrain Management/Computers and Control
Systems/Oxygen Sensor/Service and Repair) .