VUE FWD L4-2.4L (2008)
Positive: Service and Repair
Battery Positive Cable Replacement
Battery Positive Cable Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (With LAT-2.4L) (See: Service and Repair
)Battery Negative Cable Disconnection and Connection (Without LAT-2.4L) (See: Service and Repair) .
2. Remove the electronic control module bracket retaining nuts (1) and bolts (2).
3. Disconnect the positive battery junction block assembly from the bracket.
4. Loosen the positive battery cable terminal nut (1) and secure the battery positive cable (2) out of the way.
5. Remove the generator control module cover. Refer to Generator Control Module Cover Replacement ()