VUE FWD L4-2.4L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the positive battery cable (1) to the starter solenoid BAT stud.
Tighten the nut (4) to 15 N.m (11 lb ft).
3. Lower the vehicle.
4. Position the fusible link cable to the generator control module.
5. Install the following components to the generator control module.
*
Fusible link nut (1)
*
Fusible link bolt (2)
Tighten the nuts and bolts to 10 N.m (89 lb in).