VUE FWD L4-2.4L (2008)
Important: If you are installing a new ignition lock cylinder, Refer to Key and Lock Cylinder Coding (See: Procedures) .
1. Position the ignition lock cylinder in the run position and insert it into the ignition/start switch housing.
2. Rotate the ignition lock cylinder in the housing and verify proper rotation.
3. Install the wipers/washer switch. Refer to Windshield Wiper and Washer Switch Replacement (See: Sensors and Switches/Sensors and Switches -
Wiper and Washer Systems/Windshield Washer Switch/Service and Repair)