VUE FWD L4-2.4L (2008)
6. Support the wheel drive shaft with heavy mechanic's wire or equivalent.
7. Remove and discard the wheel bearing/hub mounting bolts.
8. Remove the wheel bearing/hub assembly from the steering knuckle.
Installation Procedure
1. Install the wheel bearing/hub assembly to the steering knuckle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the wheel bearing/hub mounting bolts.
Tighten the bolts to 130 N.m (96 lb ft).