VUE FWD L4-2.4L (2008)
Wheel Bearing: Service and Repair
Rear Suspension
Rear Wheel Bearing and Hub Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair) .
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
3. Remove the brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Rear Brake Rotor Replacement) .
4. Remove the wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement (See: Brakes and Traction Control/Antilock Brakes / Traction
Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement) .
5. If equipped with all wheel drive (AWD), remove the rear wheel driveshaft nut.
Important: The splash shield and park brake assembly are supported to the knuckle between the wheel bearing mounting bolts and the
wheel bearing. Care should be taken to support these items while the wheel bearing is being replaced.