VUE FWD L4-2.4L (2008)
less than 2 ohms between terminals 30 and 87.
‹› If greater than the specified range, replace the relay
Repair Instructions
Perform theDiagnostic Repair Verification (See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures/Verification Tests and Procedures) after completing the diagnostic procedure.
*
Relay Replacement (Attached to Wire Harness) (See: Power and Ground Distribution/Power Distribution Relay/Service and Repair/Relay
Replacement (Attached to Wire Harness))Relay Replacement (Within an Electrical Center) (See: Power and Ground Distribution/Power
Distribution Relay/Service and Repair/Relay Replacement (Within an Electrical Center))
*
Heater and Air Conditioning Control Replacement (See: Heating and Air Conditioning/Control Assembly/Service and Repair)
*
HVAC Control Module Replacement (See: Heating and Air Conditioning/Control Module HVAC/Service and Repair/HVAC - Manual)