VUE FWD L4-2.4L Hybrid (2007)
Amplifier: Service and Repair
Amplifier Replacement
Removal Procedure
1. Remove the rear seat.
2. Remove the fasteners that hold the amplifier.
3. Disconnect the electrical connectors from the amplifier.
4. Remove the amplifier from the vehicle.
Installation Procedure
1. Install the amplifier in the vehicle
2. Install the electrical connectors to the amplifier.
Notice: Refer to Fastener Notice.
3. Install the fasteners to the amplifier.
Tighten the fasteners to 3 N.m (26 lb in).
4. Install the rear seat.
5. Refer to Control Module References for programming and setup information.