VUE FWD L4-2.4L Hybrid (2007)
5. Using a small flat-bladed tool, remove the pull handle escutcheon from the inside door by disengaging the retaining tab at the bottom of the
escutcheon.
6. Remove the trim panel fasteners located behind the escutcheon.
7. Remove the trim panel fasteners located at the bottom of the door.
8. Pull up on the door trim panel to disengage the trim panel hooks from the sheet metal.
Installation Procedure
1. Position the door trim panel over the top of the door hooks.
2. Push downward to engage the hooks to the structure.
Notice: Refer to Fastener Notice .
3. Install the fasteners located at the bottom of the door trim panel.
Tighten the fasteners to 2.5 N.m (22 lb in).
4. Install the fasteners located behind the door trim pull handle.
Tighten the fasteners to 2.5 N.m (22 lb in).
5. Snap the inside escutcheon into place.
