VUE FWD L4-24L Hybrid (2007) Glove Compartment Handle Replacement
will be visible.
3. Depress the retainer tumbler with a thin flat-bladed tool.
4. Rotate the lock cylinder an additional 90 degrees and remove the lock cylinder.
Installation Procedure
Important: If this is the initial installation of the I/P compartment door lock, you must first remove the factory installed cylinder plug by
depressing the locking tab and pushing the plug out of the door.
Important: When you insert the key into a properly coded lock cylinder, all of the tumblers except the retainer cylinder will be flush with